NOTE: This is a step-by-step for Moodle, but should be sufficient information as a generalized help for most LMSs. This is the easiest way to integrate your LMS with LTI. However, If you are unable to complete Step 1 due to your LMS not supporting Dynamic Registration, go back to the LMS Integrations setup and choose "LTI 1.3 Manual Configuration".
Step 1: Registering ArborXR to Moodle with a Dynamic Link
First, we'll set up Moodle to communicate with ArborXR by linking our platforms with a dynamic link.
Log in to your ArborXR web application
Navigate to LMS integrations:
Go to LMS Integrations > Connect LMS or Manage Existing Connection.
Copy the LTI Dynamic URL from the integration setup modal.
Log in to Moodle: Access your Moodle Admin Dashboard.
Navigate to External Tool Settings:
Go to Site Administration > Plugins > External Tool > Manage Tools.
Paste LTI Dynamic Tool URL into input box.
Click Add LTI Advantage to begin the setup process.
Step 2: Configuring Services and Privacy Settings
Now, we'll ensure that Moodle and ArborXR can communicate securely by setting the tool to these preferred configurations. You can make these selections by clicking on the pencil icon for the application you are linking.
Configure Services:
IMS LTI Assignment and Grade Services: Use this service for grade sync OR Use this service for grade sync and column management
IMS LTI Names and Role Provisioning: Do not use this service
Tool Settings: Do not use this service
Configure Privacy Settings:
Share launcher’s name with tool: Always
Share launcher’s email with tool: Always
Accept grades from the tool: Always
Save Changes AND ACTIVATE your connection.
Step 3: Setting Up Your Course
Ensure your course is fully integrated. Follow these steps:
Navigate to My Courses and select the course where you want to integrate ArborXR.
Click on the More tab in the top navigation bar and select LTI External Tools.
Locate the tool you want to use and toggle Show in Activity Chooser to enable it.
Step 4: Adding an Activity to Your Course
You will need to locate your application to be able to add an activity to your course. Follow these steps:
Go back to your course main page.
Ensure Edit mode in the top-right corner of the screen is active.
Then, click Add an activity or resource.
From the activity chooser, find and select the LTI External Tool you just set up (i.e Ground Crew Safety Training) by clicking the All tab.
Step 5: Adding Activity Name to the New External Tool
In the General section, enter a meaningful Activity Name.
(Optional) Add a description for the activity.
Step 6: Add Grade Conditions
You will need to configure your own grade conditions based on your XR training.
Under Grade, select the appropriate Grading type (e.g., Point or Scale) and set the Maximum Grade.
Choose a Grade Category if applicable.
Enter a Grade to Pass value if you require students to achieve a minimum score for completion.
Step 6a: Add Completion Conditions (Optional)
Here, you may also will need to configure the completion requirements if you would like to set completion conditions for students.
Scroll down to the Completion Conditions section.
Select Add Requirements.
If you want completion to be based off receiving a grade, select Receive a grade.
Step 7: Save and Display
Congratulations! 🎉 You have successfully integrated ArborXR with Moodle. If you encounter any issues, refer to Moodle’s documentation or contact ArborXR support for assistance.
If you have any questions, contact ArborXR Support via the Messenger in the lower-right corner of the Web Portal!