Who can use this feature?
š¤ Organizations Owners, Admins, and custom roles with the "Create Wi-Fi Networks" permission.
š© Available on all plans.
Overview
ArborXR supports the configuration and remote provisioning of open networks, WPA, as well as the personal and enterprise modes for both WPA2 and WPA3. For the enterprise modes various encryption protocols and authentication types are supported, including certificate-based authentication. See Supported WiFi Configurations for more information.
Some Wi-Fi networks require a certificate which can be created in your Configuration Presets library then attached to the Wi-Fi Configuration Preset. For example, if you are configuring a EAP-TLS network, you may need to attach an Auth Certificate and CA Certificate. These certificates must be created first in order to attach them to the Wi-Fi Configuration Preset.
Step 1: Create the Preset
Navigate to Configuration Presets in the side navigation menu.
Click on Wi-Fi Networks to expand the section.
Select Create Wi-Fi Network.
ā
Configure network details.
ā
š” Some Wi-Fi networks require a certificate which can be created in your Configuration Presets library then attached to the Wi-Fi Configuration Preset. For example, if you are configuring a EAP-TLS network, you may need to attach an Auth Certificate and CA Certificate. These certificates must be created first in order to attach them to the Wi-Fi Configuration Preset.
Once configured, click Add.
Step 2: Assign the preset
Assign the preset from the Configuration Presets library. You can assign it to up to 100 groups or ungrouped devices in a single operation.
Navigate to Configuration Presets in the left sidebar.
Select the checkbox next to the Wi-Fi Network preset you want to assign.
Click Assign.
Choose either Assign to Groups or Assign to Ungrouped Devices.
Select the target groups or ungrouped devices, then click Assign.
š” You can also assign a preset from a single group or ungrouped device: open its Settings tab, click Manage Presets in the top right corner, select the Security preset, and click Assign Presets.
See Configuration Presets for full details, including how to view a preset's assignments, switch or detach a preset, and how sub-groups and ungrouped devices receive their settings.