Skip to main content

How to Add an Eduroam WiFi Network in ArborXR

Steps to use ArborXR's Enterprise WiFi feature to connect your devices to an Eduroam-based WiFi network.

Nathan Sales avatar
Written by Nathan Sales
Updated over 8 months ago

To add an Eduroam network to connect your devices, the following steps will help get it set up!

This process assumes a generic login from Eduroam is being used. This allows you to add multiple devices to the same Group using a single WiFi configuration.

  1. Go to the Group.

  2. Click Settings.

  3. Click Wi-Fi > Add Configuration.

  4. Click Create New.

  5. Enter the SSID (Wi-Fi name).

  6. Network Type - Enterprise

  7. Select Create Enterprise Certificate.

  8. Enter Title - can be any name (eduroam should suffice).

  9. Certificate Type - IMPORTED_PKCS

  10. Security - Eap

  11. EAP Method - PEAP

  12. Phase 2 Method - MSCHAPv2

  13. Identity - use a generic Identity (Needs to be from Eduroam. Example - [email protected], replacing the domain with your institution’s own domain)

  14. Password - enter the above Identity’s password.

  15. Certificate Type - DO NOT VALIDATE

  16. OSCP - DO_NOT_CHECK

  17. Domain - simply enter a space (critical step).

  18. Anonymous Identity - Leave blank

  19. Proxy configuration - Leave unchecked

Did this answer your question?