Who can use this feature?
π€ Organizations Owners and Admins.
π© Available on the Starter, Essential and Enterprise Plans.
Overview
The QR code enrollment method allows administrators to enroll devices to ArborXR by generating and then scanning a QR code. The QR code contains automatic enrollment credentials and a Wi-Fi payload. Administrators can also download and share the QR code to allow users to self-enroll their devices.
Supported Devices
Devices that support this enrollment method include:
Magic Leap 2
RealWear devices
Vuzix M400 & M4000
Phones & tablets
π‘ Meta Quest devices do not support this enrollment method because they do not offer a step to enable passthrough and scan a QR code as part of the initial device unboxing and setup. |
Generate the QR code
Navigate to Groups in the side navigation menu.
Select the group you would like to enroll devices into.
Select the Settings tab.
Expand the Enrollment section.
βBeneath QR Codes, select Build New.
Enter a unique title to distinguish the QR code.
Enter the Wi-Fi payload details devices will be within range of at the time of scanning the QR code.
βπ‘ Multiple QR codes can be generated from the same group. If you are sharing QR codes with users for them to self-enroll, you can create a unique QR code per user with their Wi-Fi payload details.
Click Generate.
Now that the QR code has been generated and is displayed in the QR Codes table, click on the download icon to download a .png of the QR code or click on the expand icon to open the QR code on your machine for device scanning.
β
Enroll devices
Magic Leap 2
Power on the factory reset or out of the box device. If the device is already set up, you will need to factory reset in order to open the QR code scanner.
Complete the initial device setup steps:
Pair the controller.
Select the language.
Complete or skip the prescription insert instructions.
Accept the EULA.
Select Start Scan to scan the QR Code.
βIf scanned successfully, the Android MDM setup window will appear.
Once the enrollment completes successfully, it can take up to 5 minutes for the device to appear in the ArborXR web portal. If you do not see the device in ArborXR after waiting about 5 minutes, please power cycle the device.
Phones & tablets
Power on the factory reset or out of the box device. If the device is already set up, you will need to factory reset in order to open the QR code scanner.
Tap the Android welcome screen six times.
Scan the QR code.
Finish enrollment by accepting all prompts.
β
Once the enrollment completes successfully, it can take up to 5 minutes for the device to appear in the ArborXR web portal.